Filter

Blackmagic Design MultiView 4

₦1,352,003.64 Inc. VAT

Key Features

- 4x 6G-SDI Inputs with Loop Outputs
- 1x SDI & 1x HDMI MultiView Outputs
- Supports SD, HD, UHD 4K, DCI 4K
- Independent Inputs Allow Mixing Formats
- Standard 2×2 Configuration
- Ethernet for Remote Control
- 1 RU Height Machined Aluminum Chassis
- Built-In Multi-Voltage Power Supply
- Accepts 48 VDC PoE+

Available on backorder

Category: Professional Video Tags: blackmagic, multiview, pro video Brand: Blackmagic Design

The Blackmagic Design MultiView 4 features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with increased clarity. The MultiView 4 allows for 2×2 display with each input fully re-synchronized. One 6G-SDI output and one HDMI multi-view output are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.

Housed in a 1 RU machined aluminum frame, the MultiView 4 is ready for use in the studio, broadcast truck, or even on location. It can be controlled with the included control software via the Ethernet port or by an optional Teranex front panel (not included). For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240 VAC, or you can power the unit by 48 VDC PoE+.

Note: IEC power cable is not included.

Native Ultra HD multi-view output
4x 6G-SDI inputs; accepts SD, HD, Ultra HD, and DCI 4K signals
Supports Ultra HD 4K (3840×2160) up to 30p; DCI 4K (4096×2160) at 24p
1x 6G-SDI and 1x HDMI multi-view outputs
4x SDI loop outputs
2×2 multi-view configurations
2-channel audio meters for each view
16×9 SD support
Tally support with ATEM switchers via optional Teranex Mini Smart Panel
1 RU machined aluminum chassis
Software control over Ethernet; supports Videohub router protocol
Built-in 90 to 240 VAC power supply
IEC power cable required
Supports PoE+ 48 VDC

Reviews

There are no reviews yet.

Be the first to review “Blackmagic Design MultiView 4” Cancel reply

You must be logged in to post a review.

Connections

SDI Video Inputs

4 x 10-bit SD-SDI, HD-SDI and 6G‑SDI.

SDI Video Outputs

4 loop, 1 HD/Ultra HD.

SDI Rates

270Mb, 1.5G, 3G, 6G.

SDI Video Multi View Outputs

1 x 10-bit HD-SDI and 10 bit 6G‑SDI

HDMI Video Multi View Outputs

1 x HDMI type A connector. Output supports EDID of the monitor.

SDI Reclocking

On all SDI outputs, auto switching between standard definition, high definition or 6G‑SDI video.

Reference Input

None

Multi Rate Support

Auto detection of SD, HD or 6G‑SDI. Simultaneous viewing of 4K, HD and SD video.

Updates

USB 2.0 high speed (480Mb/s) interface or via Ethernet.

Configuration

RJ45 Ethernet or USB 2.0 for firmware updates and IP address setting.

Standards

SD Video Standards

525i59.94 NTSC, 625i50 PAL

HD Video Standards

720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50,1080p59.94, 1080p60, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080i50, 1080i59.94, 1080i60