AVMATRIX SD1141 1×4 3G-SDI Distribution Amplifier

₦203,831.20

Key Features

- Distribute 1 x SDI Input to 4 x Outputs
- 3G/HD/SD-SDI Signal Auto-Detection
- Buffering and Reclocked Output
- Pass-Through Embedded Audio

Available on backorder

Category: Distribution Amplifiers Tags: AVMATRIX, distribution amplifiers Brand: AVMATRIX

The 1×4 3G-SDI Distribution Amplifier from AVMATRIX is a miniature, low-cost 1×4 3G/HD/SD-SDI reclocking distribution amplifier. Featuring four separately buffered SDI outputs, the SD1141 provides automatic input detection, reclocking, and cable equalization.

Reviews

There are no reviews yet.

Be the first to review “AVMATRIX SD1141 1×4 3G-SDI Distribution Amplifier” Cancel reply

You must be logged in to post a review.

Interfaces

Input Connectors	1 x BNC (3G-SDI / HD-SDI / SD-SDI) Female
Embedded Audio Input	SDI
Output Connectors	4 x BNC (3G-SDI / HD-SDI / SD-SDI) Female

Standards

Video Standard Compliance	SMPTE 259M/292M/296M/372M/424M/425M
Reclocking	Yes
HDR Compatibility	None
HDCP Support	None
EDID Support	None

Transmission

Video Format

SDI Input (10/12-Bit 4:4:4/4:2:2 RGB, YUV)
DCI 2K: 23.98/24/25/29.97/30 fps
DCI 2KPsF: 23.98/24/25/29.97/30 fps
1080p: 23.98/24/25/29.97/30/50/59.94/60 fps
1080PsF: 23.98/24/25/29.97/30 fps
1080i: 50/59.94/60 fps
720p: 50/59.94/60 fps
PAL: 50 fps
NTSC: 59.94 fps

Power

Power Connector	1 x USB Micro-B (5 VDC) Input
Power Consumption	Device: 5 to 17 VDC (1 W)
ESD Protection	None

Environmental

Operating Temperature	-4 to 140°F / -20 to 60°C
Storage Temperature	-22 to 158°F / -30 to 70°C
Operating Humidity	0 to 90% (Non-Condensing)

General

Dimensions	4.9 x 4.1 x 1.0″ / 125.5 x 104.0 x 24.5 mm
Weight	18.1 oz / 512 g