SONIFEX RB-SM2 Dual Stero to Mono Converter
₦473,757.82 Inc. VAT
Key Features
-
- From dual stereo to mono
- Per converter 2xXLR female in on 1xXLRmale out
Available on backorder
The RB-SM2 is a dual version of the RB-SM1, consisting of two independent converters which will produce two fully buffered and balanced mono line outputs from two stereo inputs.
All connections are on the rear panel. The XLR-3 inputs are electronically balanced with an impedance of 20kΩ bridging. These can be wired unbalanced to accept an output from domestic equipment.
The XLR-3 line outputs are electronically balanced with an output impedance of <50Ω. The outputs can be wired unbalanced by grounding the non-phase signal, allowing you to feed both balanced and unbalanced equipment.
Output gain adjustment using pre-set potentiometers for both converters allows a normalized mono output from domestic stereo equipment. The potentiometers are accessible through the rear panel.
Be the first to review “SONIFEX RB-SM2 Dual Stero to Mono Converter”
You must be logged in to post a review.
Audio Specification
Maximum Input Level: +28dBuMaximum
Output Level: +28dBu
Input Impedance: >20kΩ balanced bridging
Output Impedance: <50Ω balanced
Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Gain Range: Adjust -8dB to +18dB gain, ref. 0dB input on L and R
Common Mode Rejection: >66dB typically
Distortion: 0.01% THD @ 1kHz, ref +8dBu output
Noise: -100dB, unity gain, ref +8dBu output
Connections
Inputs: 4 x XLR 3 pin female (Balanced, can be unbalanced)
Outputs: 2 x XLR 3 pin male (Balanced, can be unbalanced)
Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Equipment Type
RB-SM2:Dual stereo to mono converter
Physical Specification
Dimensions (Raw):
28cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
11” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
36cm (W) x 20.5cm (D) x 6cm (H)
14.2” (W) x 8” (D) x 2.4” (H)
Weight:
Net: 1.05kg
Gross: 1.50kg
Net: 2.3lbs
Gross: 3.3lbs
Related products
Available on backorder. Please note that once your payment is confirmed, the product will be delivered within 2–3 weeks
Available on backorder. Please note that once your payment is confirmed, the product will be delivered within 2–3 weeks
Backorder
Cablevisual AL-HDSW4-1-1 4K x 2K HDMI Switcher with audio output (3.5mm stereo, Toslink or Coaxial)
Available on backorder. Please note that once your payment is confirmed, the product will be delivered within 2–3 weeks
Available on backorder. Please note that once your payment is confirmed, the product will be delivered within 2–3 weeks
Available on backorder. Please note that once your payment is confirmed, the product will be delivered within 2–3 weeks
Available on backorder. Please note that once your payment is confirmed, the product will be delivered within 2–3 weeks
Reviews
There are no reviews yet.