The Sony HDC-5500 system camera brings new levels of image quality, portability and creative flexibility to live production environments. Enjoy premium 4K/HD/HDR picture quality – and anticipate tomorrow’s production needs while maintaining full compatibility with today’s workflows and system hardware.
Sony HDC-5500 2/3-inch 4K CMOS sensor portable system camera with direct 4K output
₦0.00
Key Features
-
- Easy Transmission Change
- Wider Workflow Options
- Seamless Integration
- Display Camera Number and Tally
- Multi-speed Slow-motion Acquisition
- Servo Controlled ND and CC Filters
- Rich Focus Assist Functions
- Network TRUNK
Available on backorder
A newly-developed on-board signal processor allows the HDC-5500 to output 4K signals directly without the addition of a dedicated external baseband processor unit, saving rack space in the confines of an OB vehicle or studio environment. It can also output 4K signals directly via 12G-SDI. Thanks to an all-new 4K baseband transmission system, the compact camera is ideal for use in steadicam and wireless camera systems.
Capture premium pictures with Sony’s advanced 2/3-inch 4K CMOS sensor with global shutter technology that eliminates the ‘jello effect’ and banding noise. This allows the HDC-5500 to capture pristine 4K images with exceptionally low noise (-62dB), impressive sensitivity (F10 at 1080/59.94p or F11 at 1080/50p) and high dynamic range, while achieving the ITU-R BT.2020 broadcast standard wide color space. It’s teamed with a specially developed LSI Digital Signal Processor that fully realises the extraordinary imaging power of this new sensor.
The HDC-5500 can capture High Dynamic Range images, supporting Sony’s SR Live workflow for simultaneous HDR/SDR production with reduced inventory requirements.
This product contains pre-installed software and requires the purchase of licence keys to activate some functions.
Be the first to review “Sony HDC-5500 2/3-inch 4K CMOS sensor portable system camera with direct 4K output” Cancel reply
You must be logged in to post a review.
General | |
Power requirements | AC 240 V, 1.4 A (max.), DC 12 V, 9.5 A (max.), DC 240 V, 1.05 A (max.) |
Operating temperature | –20°C to +45°C (–4°F to 113°F) |
Storage temperature | –20°C to +60°C (–4°F to 140°F) |
Mass | Approx. 5.0 kg (11 lb 0.4 oz) (Unit only) |
Imager | |
Imager | 2/3-inch type CMOS sensor with global shutter |
Method | 3-CMOS, RGB |
Effective resolution (H x V) | QFHD: 3840 × 2160 |
HD: 1920 × 1080 | |
Electrical Characteristics | |
Sensitivity | F10 with 1080/59.94p |
F11 with 1080/50p | |
(at 2,000 lx with 89.9% reflectance) | |
Signal-to-noise ratio | -62 dB or higher |
Geometric distortion | Negligible (not including lens distortion) |
Optical system specifications | |
Spectrum system | F1.4 prism |
Built-in filters | ND filters 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND |
CC filters A: Cross filter, B: 3200K (clear), C: 4300K, D: 6300K | |
Input /output connectors | |
CCU | Optical / electrical multi connector (LEMO 3K.93C connector) (x1) |
LENS | 12-pin (x1) |
VF | 20-pin (x1) |
MIC 1 IN | XLR 3-pin, female (x1) |
AUDIO IN CH1, CH2 | XLR 3-pin, female (x1 each) |
When AUDIO switch is set to MIC: –60 dBu (can be selected up to –20 dBu by menu operation), balanced | |
When AUDIO switch is set to LINE: 0 dBu, balanced | |
INTERCOM 1 | XLR 5-pin, female (x1) |
INTERCOM 2 | XLR 5-pin, female (x1) |
EARPHONE | 4-pole mini jack (x1), (3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard) |
DC IN XLR 4-pin (x1), DC 10.5 to 17 V | XLR 4-pin (x1), DC 10.5 to 17 V |
DC OUT | 4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹ |
2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹ | |
SDI 1 | BNC (x1) |
SDI 2 | BNC (x1) |
SDI 3 | BNC (x1) |
SDI MONI | BNC (x1) |
TEST OUT | BNC (x1) |
PROMPTER / GENLOCK | BNC (x1) |
PROMPTER 1 Vp-p, 75 O | |
GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 O, SD: Black burst (NTSC: 0.286 Vp-p, 75 O/PAL: 0.3 Vp-p, 75 O) | |
PROMPTER2 | No |
RET CTRL | 6-pin (x1) |
REMOTE | 8-pin (x1) |
TRACKER | 12-pin (x1) |
CRANE | 12-pin (x1) |
USB | USB 2.0 Type A 4-pin (x1) (for connecting USB drive) |
NETWORK TRUNK | RJ-45 type 8-pin (x1) |
Reviews
There are no reviews yet.