GVM Professional Video Aluminum Alloy Motorized Camera Slider (48″)
₦635,784.22
Key Features
-
- 46″ Quiet Motorized Sliding Range
- Supports Cameras up to 11 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120° Panning
- Height-Adjustable Legs
- Three 1/4″-20 & 3/8″-16 Mounting Points
- NP-F-Type Battery Lasts About 8 Hours
- 6 x Camera Control Cables Included
Available on backorder
The height-adjustable feet are individually adjustable up to 0.79″, allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4″-20 and three 3/8″-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.
Be the first to review “GVM Professional Video Aluminum Alloy Motorized Camera Slider (48″)”
You must be logged in to post a review.
Performance
Sliding System Motorized Slider
Load Capacity 11 lb / 5.0 kg (Horizontal)
5.5 lb / 2.5 kg (Inclined)
Travel Distance 46″ / 116.84 cm
Bubble Level Yes
Mounting
Tripod Mounting 3 x 1/4″-20 Female Thread
3 x 3/8″-16 Female Thread
Battery Plate Type 1 x Sony L-Series / NP-F (Built-In)
Rail
Material Aluminum
Carriage
Camera Mounting Screw 1/4″-20 Male, 3/8″-16 Male
Carriage Dimensions 4 x 4″ / 10.2 x 10.2 cm
Bearings
Number of Bearings 4
Motor
Power 4 W (7.2 V / 4400 mA)
Motor Sliding Speed 0.23 to 1.78 in/s / 0.89 to 4.06 cm/s
Pan & Tilt Range Pan: 120°
Physical
Body Material Aluminum
Track Length 48″ / 121.92 cm, Including Legs
Track Height 4″ / 10.16 cm
Leg Height Adjustment 4.00 to 4.79″ / 10.16 to 12.16 cm
Weight 6.6 lb / 2.99 kg
Related products
Tripods and Pedestals
TL MEDIA 15KG Payload Professional Fluid Head Broadcast Tripod Kit
Tripods and Pedestals
Sirui MT2204+K20X 4-Section Carbon Fiber Tripod with K-20X Arca-Type Ball Head and Monopod
Camera Support
Camera Support
GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider (31″) with Bluetooth Remote
Camera Support
JIEYANG JY-0508 8KG Professional Camera/Video/DSLR VIDEO Tripod Fluid Head Damping for Video
Reviews
There are no reviews yet.