GVM GR-120QD Professional Video Carbon Fiber Motorized Camera Slider(48″)
₦654,471.52
Key Features
-
- Smooth, Quiet Carbon Fiber Camera Slider
- 120° Panorama, Tracking, Time-Lapse
- 1/4″-20 & 3/8″-16 Tripod Threads
- Supports Loads up to 11 lb, Folding Feet
- Battery-Powered USB Remote Control
- Motor with Buffer Pause for Smooth Stops
- Center Track Adjusts for Angled Slides
- 1/4″-20 Camera Screw, 3/8″-16 Bushing
Available on backorder
The GP-120QD features a 45.7″ sliding distance and supports camera loads up to 11 lb. There is also a center track that allows the carriage to perform angled slides, 120° panorama shots, and even parallax tracking shots. A battery-powered USB remote controller is included and provides configuration for the adjustable carriage motor. You can set slider speed, automated interval presets, and time-lapse functions. You can also control the camera shutter to match the moves of the slider with the included six-cable set.
The carriage features 1/4″-20 and 3/8″-16 tripod threads to mount the slider in the center, or you can set it on a surface with the folding feet. A 1/4″-20 screw allows you to mount your camera on top of the carriage, and a 3/8″-16 bushing allows you to mount a wide variety of cameras. Also included with the slider are a ball head, a battery, a battery charger, a shutter extension cable, a USB remote control cable, and a carry bag.
Tracking Shots
Adjust the red knobs on both sides of the camera slider to the upper left or lower right. The slider supports a time-lapse or video shot, as well as manual and electric modes.
Customizable Settings
On the USB remote, set start/end points, motor torque, slip speed and interval, stop time, photo number, and auto-loop.
120° Panorama
The slider features a 120° panorama mode, which can be achieved by adjusting the red knob on both sides of the camera.
Smooth and Silent Sliding
The slider incorporates a new motor and is constructed of lightweight carbon fiber, which enables a smooth and silent sliding experience.
Multilevel Adjustment
The slide rails are equipped with multiple 1/4″-20 and 3/8″-16 mounting holes, making the slider compatible with a variety of tripods.
Folding Feet
The folding foot feature was designed to ensure that the dolly track can work horizontally.
Camera Mounting
The carriage features a 1/4″-20 camera mounting screw and includes a 3/8″-16 bushing for compatibility with additional cameras.
Included
Included are a ball head, a battery, battery charger, six-cable camera shutter release set, a shutter extension cable, and a carry case.
Be the first to review “GVM GR-120QD Professional Video Carbon Fiber Motorized Camera Slider(48″)”
You must be logged in to post a review.
Performance
Sliding System Roller Bearing Sliding System
Load Capacity 11 lb / 4.99 kg
Travel Distance 45.7″ / 116.08 cm
Mounting
Tripod Mounting 1/4″-20 Female Thread
3/8″-16 Female Thread
Battery Plate Type 1 x Sony L-Series / NP-F (Built-In)
Rail
Material Carbon Fiber
Camera Mounting Screw 1/4″-20 Male, 3/8″-16 Male
Motor
Power 4 W (10 V / 400 mA)
Pan & Tilt Range 120°
Physical
Track Length 48″ / 121.92 cm
Weight 5 lb / 2.27 kg
Related products
Tripods and Pedestals
Sirui ST-125 5-Section Carbon Fiber Tripod & VA-5 Ultra-Compact Video Head Kit
Tripods and Pedestals
TL MEDIA 15KG Payload Professional Fluid Head Broadcast Tripod Kit
Camera Support
Camera Support
JIEYANG JY-0508 8KG Professional Camera/Video/DSLR VIDEO Tripod Fluid Head Damping for Video
Reviews
There are no reviews yet.