Saramonic SR-PAX2 Audio Mixer
₦224,404.50
-
- Combine Two Mics to One Stereo Output
- Sum a Stereo Input to a Mono Output
- Supplies Phantom Power
- 3.5mm (1/8″) and XLR Inputs
- 3.5mm (1/8″) Stereo Line Output
- Dedicated 3.5mm Stereo Headphone Output
- Left and Right Gain Controls
- Left and Right Level Meters
- Mono/Stereo Output Mode Switch
- Powered via 9V Battery
Available on backorder
The SR-PAX2 from Saramonic is an active 2-channel audio adapter designed to provide a compact solution for recording two signals to any DSLR or camcorder that has a standard mounting base, and a built-in audio jack. It features left and right gain controls and meters, supplies phantom power, and is powered by a 9V battery (available separately).
It attaches to the base of a camera, and can be mounted on a tripod or case. Connect inputs via two mono 3.5mm (1/8″) jacks, the single stereo 3.5mm (1/8″) jack, or two XLR jacks. Route the stereo 3.5mm (1/8″) output to your DSLR or camcorder. The output can be set to mono or stereo via the M/S switch. A dedicated stereo 3.5mm (1.8″) headphone output allows quick monitoring of the mic signals.
- Two 1/8″ (3.5 mm) stereo line/mic inputs
- Two XLR microphone inputs
- One 1/8″ (3.5mm) stereo line output to phone
- One 1/8″ (3.5mm) headphone monitor output
- Volume control knob
- Independent input control switch
- Independent L/R level meters
- Independent phantom power control for inputs
- Includes 3.5mm audio cable
Be the first to review “Saramonic SR-PAX2 Audio Mixer”
You must be logged in to post a review.
| Inputs | 2 x XLR 3-pin 3 x 1/8″ (3.5 mm) mini jacks (one stereo, two mono) |
| Outputs | 1 x 1/8″ (3.5 mm) mini jack for stereo line output 1 x 1/8″ (3.5 mm) mini jack for headphone output |
| Frequency Response | 20 Hz to 20 kHz, ±0.5 dB |
| THD | Less than 0.01% @ 1 kHz, -30 dBu input |
| SNR | 80 dB @ 1 kHz, -30 dBu input |
| Input Gain | Input 1: Line: 0 dB Mic/Phone: 20 dB Input 2: |
| Phantom Power | Input 1: 5 V / 3 V power supply Input 2: 48 V power supply |
| Level Meters | -18 dB to +3 dB in 3 dB increments |
| Power Requirements | 9 V alkaline or lithium battery |
| Battery Duration | 5 hours, typical with alkaline battery 3 hours, typical with lithium battery |
| Dimensions | 5.4 x 3.2 x 2.5″ / 136.0 x 80.5 x 62.5 mm |
| Weight | 13.5 oz / 382.7 g |
Related products
Wireless Intercom/Talkback
Reviews
There are no reviews yet.