GVM GB20W On-Camera RGB LED Video 2-Light Kit with Bluetooth App Control and Power Supplies & Desktop Stands
₦353,430.36
Key Features
- For Content Creators and Vloggers
- Output: 877 Lux at 3.3′ (6400K)
- 2700 to 10,000K; RGB Control
- 4 x 9.5″; AC/DC Operation
- CRI 97
- Onboard and Bluetooth Control
- Passive Cooling
- 0 to 100% Dimming, 8 Lighting Effects
- Cold Shoe Mounting
- Separately Available AC Adapter
Available on backorder
The CCT mode allows you to select your color temperature output from between 2700 to 10,000K with 0 to 100% stepless dimming, allowing you to use the light in a variety of environments from interior to exterior. HSI mode uses the RGB LEDs to provide you a full spectrum color output, which allows you to adjust the output from 0 to 360° on the RGB scale while adjusting brightness, as well as saturation from 0 to 100%. Scene mode allows you to access eight preinstalled scene selections. A downloadable app allows you to control your fixture from your phone via Bluetooth. Power the light via the built-in L-series battery plate and included battery or using an optional AC power supply.
Operating Modes
RGB Color Mode
Scroll through the RGB color wheel in 1° increments. Dial-in nearly any color in the visible spectrum.
CCT Mode
The traditional correlated color temperature (CCT) mode allows you to accurately adjust your color temperature from 2700 to 10,000K.
Features
Intuitive On-Unit Interface with OLED Display
The built-in OLED screen offers a simple display, while push buttons and a single rotating knob provide local control of the fixture.
GVM LED App
Install the app on your mobile device to remotely control the fixture via Bluetooth to control color temperature, HSI settings, and brightness, as well as on/off and duration. The app is available for both iOS and Android.
Mounting
The fixture features a 1/4″-20 threaded hole on the bottom and includes a tiltable cold shoe bracket that attaches to the rear of the unit by snapping into slots on the back. This allows you to tilt the fixture forward or back as you desire. The tiltable shoe bracket also has a 1/4″-20 threaded hole for mounting on light stands or other supports.
Accessory
A cold shoe is built into the top of the fixture for mounting accessories on the light.
8 Built-In Scene Modes
Police car, candlelight, TV, bad bulb, lightning, party, disco, paparazzi
Be the first to review “GVM GB20W On-Camera RGB LED Video 2-Light Kit with Bluetooth App Control and Power Supplies & Desktop Stands”
You must be logged in to post a review.
Light Fixture
Item Type 1 x LED Light Panel
Included Storage Case None
Lumens Not Specified by Manufacturer
Photometrics 2700K
40 fc / 432 Lux at 3.3′ / 1 m*
57 fc / 624 Lux at 1.6′ / 0.5 m
*Standardized Measurement Supplied by the Manufacturer
6600K
81 fc / 877 Lux at 3.3′ / 1 m*
98 fc / 1060 Lux at 1.6′ / 0.5 m
10000K
10 fc / 112 Lux at 3.3′ / 1 m*
62 fc / 673 Lux at 1.6′ / 0.5 m
Color Temperature 2700 to 10,000K
Color Modes RGB
Color Accuracy Standard CRI 97
Cooling System Passive
Dimming Yes, Built-In Dimmer (Continuous)
Built-In Flash No
Umbrella Mount No
Connectivity
Wireless Remote Control Type Bluetooth
Mobile App Compatible Yes: Android & iOS
App Name: GVM
*As of October, 2020: Check with manufacturer for the most up-to-date compatibility
Power & I/O
Power Source AC to DC Adapter (Not Included)
Battery (Included)
Inputs/Outputs 1 x Barrel / Coax Power Input
Battery Plate Type 1 x Sony L-Series / NP-F (Built-In)
Battery 1 x Sony-Type L-Series / NP-F Rechargeable Lithium-Ion (Included)
Battery Charging 1 x Single-Bay Charger (Included)
DC Input Power 9 VDC at 3 A
Power Consumption 20 W (Maximum)
Mounting
Included Light Stand / Mount 1 x Tabletop Stand with Cold Shoe
Fixture Mounting 1 x 1/4″-20 Female Thread
Proprietary
Included Adapter 1 x 4-Prong Mount: Accessory Foot with 1/4″-20 Female Thread to Proprietary
Environmental
Water Resistance None
General
Display OLED
Materials Plastic
Dimensions 9.5 x 4.2 x 1.2″ / 24.2 x 10.6 x 3 cm
Weight 0.88 lb / 400 g
Related products
Reviews
There are no reviews yet.