FeelWorld CUT6 6″ 4K HDMI Touchscreen Recorder/Monitor

Use the FeelWorld CUT6 6″ 4K HDMI Touchscreen Recorder/Monitor to both view and capture up to 1080p30 HDMI video with an applied LUT. The CUT6 can power select cameras via its 8.4V barrel output. The CUT6 features a 6″ 1920 x 1080 touchscreen display, one HDMI 2.0 input, and one HDMI 1.4 loop output supporting up to 1080p60 resolution video. A 3.5mm headphone jack is also provided for audio monitoring on set.

The CUT6’s intuitive operating system is navigated with touch and swipe gestures and offers access to tools and functions such as built-in HDR and 3D LUTs, anamorphic de-squeeze, vectorscope, zoom, focus assist, and additional display functions. The CUT6 enables you to upload up to 50 3D LUTs via a micro-SD card slot. Power options include an integrated L-series battery plate and a DC power input port.

Monitor/Recorder

The CUT6 monitor enables you to record up to 1080p30 MP4 HDMI video from compatible cameras using its USB 2.0 port with FAT32 support. This monitor supports live LUT application with the ability to upload up to 50 LUTs. Total recording time is dependent on your external storage capacity.

Live Stream Recording

Use the CUT6 monitor to capture your continuous live stream, not just highlights or an OBS (Open Broadcaster Software) local recording. The ability to record with an applied LUT saves time in post-production.

Touchscreen Workflow

The operating system and new user interface provide a tap and swipe workflow with easy-to-use function icons including a record button. A button wheel on the top of the monitor provides alternate control to the touchscreen.

Built-In HDR

The CUT6 features built-in HLG 2020, HLG 709, and HLG P3 HDR modes, enabling you to view and capture nuanced footage with a wide dynamic range and true colors.

3D LUT Support

Load up to 50 custom LUTs via the micro-SD card slot.

Output a LUT image to a director’s monitor via the HDMI loop-out.

Interfaces

Connect to virtually any camera via the HDMI 2.0 input and output HDMI 1.4 video to a larger display or to a wireless transmitter.

Monitor embedded audio via the 3.5mm stereo headphone jack for audio monitoring.

Mount the CUT6 using the 1/4″-20 threads on the top, bottom, and right side.

Includes a tilting bracket to help you get the best viewing angle.

Integrated Fan

The built-in fan cools the monitor and can be adjusted to low, middle, and high settings.

Power Options

Power the CUT6 using the integrated L-series battery plate and a separately available battery or using the 12 VDC barrel input port for continuous power.

Provide power for select cameras using the 8.4 VDC power output.

Display Features

3D LUT support in Rec. 709

RGB and YUV waveforms

Vectorscope

RGB histograms

Focus peaking assistance

False colors (Spectrum, ARRI)

Check field (red, green, blue, mono)

Zebra exposure (adjustable 1 to 100%)

Underscan and overscan

Zoom (1x to 5x)

Anamorphic de-squeeze (1.25x, 1.33x, 1.5x, 1.8x, 2.0x, 2.0x mag)

Pixel-to-pixel zoom

Nine-section grid

Center marker

Safety markers (70, 80, 90%, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1)

Aspect ratio markers (16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1, 1.91:1, 5:4)

Marker colors (red, green, blue, white, black, yellow)

Image flip (automatic, 180° horizontal flip, vertical flip)

Image freeze